AMAZON

Showing posts with label windows 8. Show all posts
Showing posts with label windows 8. Show all posts

Sunday, September 23, 2012

How to make Bootable pendrive USB Disk for installing Windows 7, Vista, XP, windows 8




 
There are many procedures to create bootable USB disk, some of the procedures are given below :-
1st Method
I feel it is the easiest and the best way to create bootable USB disk …..
Now just follow these steps to create bootable USB disk:-
  •   Insert your USB disk/pendrive to your system and backup all the data from the USB as your USB drive will be formatted during the process.
  •  Now download WinToFlash tool (free) from here.
  •   Run the tool, and browse to your Windows 7, Vista, or XP  DVD/CD files in Source path option,  while in target option choose pendrive as your target drive (make sure that your USB drive letter is correct).
  •  Choose file system as FAT32.
  •  Click on Create button to begin the bootable USB process. Wait for few minutes so that the program copies your Operating System (OS) installation files to your USB disk.
  •  On completion Finish the process & now your bootable pendrive is ready for installation of OS.
Note :- Some times its shows error message" window root> hal.dll is missing, if it happens   just ignore it & proceed with the next step.


2nd Method
 You can use this method to make USB disk bootable without using any additional utility or program. For this you need a pen drive having minimum space of 4 GB (In case of vista / windows7) or 2GB (in case of windows XP) and a Installation DVD/CD of Windows 7/Vista/XP.
Now just follow these steps:-

1. First of all you need to format the USB drive / Pen drive:-
Note :- Normal right click format method of windows  doesn’t work here as bootable pendrive preparation needs some special treatment, also this bootable USB guide may not work if you are trying to make a bootable USB on a computer running on windows XP .
  • From the start menu  choose Run then open command prompt as an Administrator.
  • Now to identify your USB Drive, you need to type this command and press enter every time.
  1.      Diskpart and hit enter :- This is to open the disk partition program.
  2.       list disk and hit enter  :- This show the list of drives.
  • Now you can see the disk listed. Note down the disk number of your pen drive. For example assume that the number is 'Disk 1 '.
  • Now type all these commands in a successive manner and hit Enter every time to execute. The purpose of these commands here is to format the pen drive:
  1.   select disk 1
  2. clean
  3.   create partition primary
  4. select partition 1
  5. active
  6.   format fs=NTFS   or   format fs=FAT32  (Format process may take few seconds)
  7.   assign
  8.   exit

                              Fig.1 Format using NTFS scheme
 
                            Fig.1 Format using FAT32 scheme
  • Now the disk partition program will exit and your formatted USB flash drive ready to be made bootable.

2. Now to make the pen drive bootable, follow this steps:-
Now insert the Installation DVD/CD of Windows 7/Vista/XP in your DVD/CD drive and note down the drive letter of the DVD/CD drive and USB disk/pendrive. Here I use “G :” as my DVD/CD drive letter and “E:” as my USB drive letter.
 Go back to command prompt and execute the following commands:
  • Now assume that DVD drive is G: and Pen  drive as E:
  • Now type G: :CD BOOT and hit enter. Where “G:” is your DVD drive letter.
  • CD BOOT and hit enter to see the below message.
  • Now type BOOTSECT.EXE/NT60 E: to update your USB drive with bootmgr code. (Where “E:” is your USB drive letter)
  • Finally copy all the contents from the Windows 7 DVD to your Pen drive.
  • Now your pendrive is ready…

Here you have created the bootable pendrive. Now what you need is to make your BIOS to boot from USB. So follow this steps:-
  • Insert your pen drive to the PC and restart the system.
  • Now Enter the BIOS system accordingly by pressing the “delete” key. (This may vary sometimes it will be F2 or F12. It depends on your system make. Anyway during the start up, your system will display which key to press to enter the BIOS). Now select the USB/Pendrive as the first boot device in “Boot disk priority” option.
  • Now save the settings in BIOS and restart your system, so that system is able to boot from USB and follow the steps necessary to Install Windows 7/Vista/XP.
If you like the above post then don’t forget to post your comments……
 
Please make thanks
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Thursday, September 20, 2012

Hide Your Folders in windows OS Without Any Software




With this trick, you can create a secure password protected folder in Windows which no one except you can access. To use this trick, follow the instructions given below:-

1. Open Notepad.

2. Copy and paste the exact code given below:-

cls

@ECHO OFF

title Kanishk Security System.

if EXIST "Control Panel.{21EC2020-3AEA-1069-A2DD

-08002B30309D}" goto UNLOCK

if NOT EXIST MyFolder goto MDMyFolder

:CONFIRM

echo Are you sure to lock this folder? (Y/N)

set/p "cho=>"

if %cho%==Y goto LOCK

if %cho%==y goto LOCK

if %cho%==n goto END

if %cho%==N goto END

echo Invalid choice.

goto CONFIRM

:LOCK

ren MyFolder "Control Panel.{21EC2020-3AEA-1069-A2DD

-08002B30309D}"

attrib +h +s "Control Panel.{21EC2020-3AEA-1069-A2DD

-08002B30309D}"

echo Folder locked

goto End

:UNLOCK

echo Enter password to Unlock Your Secure Folder

set/p "pass=>"

if NOT %pass%== mysecretfolder goto FAIL

attrib -h -s "Control Panel.{21EC2020-3AEA-1069-A2DD

-08002B30309D}"

ren "Control Panel.{21EC2020-3AEA-1069-A2DD

-08002B30309D}" MyFolder

echo Folder Unlocked successfully

goto End

:FAIL

echo Invalid password

goto end

:MDMyFolder

md MyFolder

echo MyFolder created successfully

goto End

:End

Click on the File Menu. Click on Save As.

4. Select All Types in the Save As Type dropdown menu. Save the file as *.bat or Locker.bat.

After creating the file, double click on the Saved file. A new folder will be created. Enter your data in the folder. Again, double click on the batch file. Type Y and press Enter. The folder will be hidden from view.

To re-view your folder, double click on the saved batch file. Enter password as "mysecretfolder " without quotes and press Enter key. This is also the default password. Your folder will be visible again.

To change the default password, edit the part of the code where it is written "mysecretfolder " and enter your own password.

The overall usability of this trick can be improved by deleting the batch file after hiding your folder and re-creating it when you wish to access your folder again.

If you face any problem using this trick, you can write a comment and I will do my best to help you.

Monday, August 20, 2012

How to install / add new fonts for tamil/ english fonts in ubuntu /windows


Download fonts from free websites for tamil fonts for windows( 8/ 7/ xp/ 2000)/ linux (debian/ ubuntu/ fedora)
Ubuntu version 12.10 and lower version of ubuntu fonts download websites



exclusive for additional packages in built in Ubuntu


Installation Instructions :

  • Click on the Download Button 
  • Unzip the file
  • Double click Setup.exe to start installation
  • After installing, please follow the process for enabling Indian languages on Windows 2000 and above as given below in the Settings section.
Note : These fonts will work best with Windows XP and Office 2003




Usage Instructions (Keyboard Driver) :

  • Set the Locale to Tamil (small icon with "TA" should appear in the right hand side of the Taskbar)
  • Start the Keyboard driver by clicking on 
    • Start->Program files->Tamil Unicode Keyboard Driver ->ShreeKbd.exe.
  • A small blue-yellow icon will appear near the TA icon in the task bar.
  • Right click this icon to choose the keyboard layout.


System Requirement

  • Processor: Intel Celeron onwards
  • Windows (NT/2000 Onwards):


Settings

  • Win2000:
    • Go to "Control Panel" and click on "Regional Options" 
    • Click "General" tab and from Language Settings for System window check on "Indic" 
    • It will ask for Win2000 CD. Installation will happen. Reboot the system 
    • Now again go to Regional Option and click on "Input Locales" tab 
    • Add the languages in which you want to type. 
    • A small "EN" will appear in the system tray. Left click on "EN" and choose the language to type. 
  • Win XP:
    • Go to "Control Panel" and then click "Regional and Language Options" 
    • Click on "Languages" tab and check on the box which says "Install Files for complex scripts". 
    • This method will ask for Win XP CD. Put the CD in the CD drive and let the installation begin. 
    • Once the installation is complete boot the system if required and again goto 2nd step. 
    • Now click "Details" tab. Click on "Add" to add the languages of your choice. 
    • A small "EN" will appear in the system tray. Left click on "EN" and choose the language to type. 
    • Open fonts folder